90% of DorMag Pro parts are sourced in the UK. All plastic parts have their relevant recycling symbol engraved on them, to let you know their recycling requirements.

The product can be disassembled by removing the 3 screws at the back of the unit and then removing the electronics/hardware.

• The battery carrier metal clip can be removed by clipping the heat-staked pins.
• The door keeper can be disassembled by removing the single bolt at the back at the back of the assembly.
• The PCB, magnet, motor, battery clip and keeper plate can be recycled at relevant authorised waste services
• The battery packs are lithium, they cannot be put in battery bins, they need to be disposed of correctly at a lithium recycling location.

Yes, but a Fire Risk Assessment must be completed first. Please give us a call on 01273 320650 to discuss this further.

All Fireco hardware has a 2-year warranty.

All Pro Range devices can be purchased by giving us a call on 01273 320650.

DorMag Pro is a wireless fire door magnet that holds your fire doors open safely and legally. It’s radio-controlled by ProHub, which is connected directly to your fire panel.

When your fire alarm is triggered, DorMag Pro will receive a radio signal from ProHub (on its own dedicated network) and release your fire doors to close.

The DorMag unit can be installed in a variety of positions on your fire door, and additional accessories (such as a keeper chain) are available to suit your environment

DorMag Pro is controlled by ProHub, which is directly connected to the fire alarm panel. As this requires professional installation, DorMag Pro is exclusively available to professional installers. We’ll recommend an installer in your area.

Yes, DorMag Pro is compliant to BS7273-4 guidelines.

DorMag Pro is tested to all applicable British and European standards.

Please see the DorMag Pro Declaration of Performance for full details: EU and UKCA.

Yes, The DorMag Pro unit does not require any wiring to mount to the wall/door. It runs on a supplied battery pack, which we recommend be replaced once a year. You can purchase a replacement battery through our online shop.

The ProHub (which controls DorMag via radio signal) will require wiring to the fire alarm panel and a power supply. If ProExtenders are required for your building, they will also require wiring to a power supply.

Larger buildings may require a ProExtenders which increases the radio signal range.

A radio survey determines how many ProExtenders you need for radio coverage.

Up to 500 Pro devices can go on one network.

DorMag Pro is battery-operated so would not directly lose power in a power cut. DorMag Pro would continue to look for a signal from its ProHub. If your ProHub were to lose power, DorMag would fail-safe up to 4 minutes after losing communication with its ProHub.

Different power variations of ProHub are available, including a battery backup option. This would ensure that in the event of a power cut, DorMag Pro would not lose communication with ProHub.

Our team can advise you on what variation of ProHub would best suit your building. Please give us a call on 01273 320650 and we’d be happy to help.